PROACCEL®
PROFESSIONAL GRADE 3 AXIS ACCELEROMETER
ProAccel® ACC-332-3A
| Images | » |  |
 |
| Downloads | » | Spec Sheet  |
Manual |
| Applications | » |
|
Features:
- Excellent performance
- Accurate in severe environments
- Rugged
- Wide bandwidth
- Stable
- CE Certified
- High reliability
- Two-year warranty
The best description of the ProAccel® triaxial accelerometer is ACCURACY. Scale factor, bias and alignment have all been optimized far beyond the performance of the usual MEMS accelerometer. There is no better triaxial accelerometer for instrumentation, stabilization and control applications.
Watson Industries has been designing and manufacturing solid-state sensors since 1980. Watson builds this accelerometer under AS9100 quality standards and CE certification with new features including built-in test and enhanced EMI/RFI protection. Upgrades that are standard for the ProAccel® include available acceleration ranges up to 10 g's, internal power regulation for power input between 8 volts and 45 volts, and a case mounted connector.
Specifications | |||
Acceleration | |||
| Range: X, Y, Z | ±5g (Typical) | See table below | |
| Analog Scale Factor: | 1.00 V/g (Typical) | See table below | |
| Scale Factor Accuracy: | 0.2% | At constant room temp | |
| Scale Factor Temp Coefficient: | 0.5% | Over temp range | |
| Bias: X, Y, Z | 5mg | At room temperature | |
| Bias: Zero Bias | <10mg | Run-To-Run variation | |
| Bias: Over Temp Range | <10mg | ||
| Non-Linearity: | < 0.1% | Full scale range | |
| Bandwidth: | 100 Hz | Butterworth | |
| Noise: | 1.5mg rms | 1 Hz to 100 Hz | |
Environmental | |||
| Temperature: Operating | -40°C to +85°C | ||
| Temperature: Storage | -55°C to +85°C | ||
| Vibration: Operating | 5g rms | 20 Hz to 2 kHz | |
| Vibration: Survival | 10g rms | 20 Hz to 2 kHz | |
| Shock: Survival | 500g | 10mS ½ sine wave | |
Electrical | |||
| Input Power: | 8 to 45VDC | Reverse protected | |
| Input Current: | 20mA @ 12VDC | 0.25W | |
| Analog Output: | ±5VDC | ||
| Output Impedance: | 1000 Ohm | 5% | |
Physical | |||
| Size: Including Mounting Flanges | 1.2"W x 2.8"L x 1.2"H | 30 x 71 x 30 (mm) | |
| Weight: | 2oz (0.1lb) | 60 grams (0.1Kg) | |
| Connection: | Amp 1445057-6 Connector (6 pin) | Mating Connector Incl. Wire bundle optional | |
| Life: | > 100,000 Hrs MTBF | 20 years shelf life | |
| • | Specifications are subject to change without notice. | ||
| • | This product may be subject to export restrictions. Please consult the factory. | ||
Watson Industries ProAccel® Models* | ||||||||||
| Model | Range | Output | Zero Ref (0°/sec) | Scale Factor | ||||||
| ACC-322-3A | ±2 g's | ±5 VDC | 0.0 VDC | 2.50 V/g | ||||||
| ACC-332-3A | ±5 g's | ±5 VDC | 0.0 VDC | 1.00 V/g | ||||||
| ACC-342-3A | ±10 g's | ±5 VDC | 0.0 VDC | 0.50 V/g | ||||||
| *Custom ranges are available. | ||||||||||